Interfacing to the codebug
-
Ohno
- Posts: 1
- Joined: Fri Dec 25, 2015 1:06 pm
Post
by Ohno » Fri Dec 25, 2015 1:14 pm
Hello,
yesterday i worked the first time with my new codebug. I created my first CodeBug program and transfered it to the Codebug - it worked fine! I plugged out the usb-cable and plugged it in to try another program - but Windows 8.1 said always "USB Device Not Recognized"
I tried all other usb ports but no one worked with CodeBug again
-
katman
- Posts: 4
- Joined: Tue Dec 22, 2015 10:58 pm
Post
by katman » Fri Dec 25, 2015 6:52 pm
I've had Windows say devices are not recognised when I plug them in, Mice, Flash Drives etc. Sometimes it just gets confused and a full shutdown followed by booting up again will resolve it.
-
pigraham
- Posts: 65
- Joined: Sat Aug 15, 2015 1:41 pm
Post
by pigraham » Fri Dec 25, 2015 9:53 pm
I had this symptom due to a faulty USB cable. It was working fine, then it wasn't. Changing the cable cured the problem.
-
BMS Doug
- Posts: 61
- Joined: Wed Aug 26, 2015 8:54 am
-
Contact:
Post
by BMS Doug » Mon Dec 28, 2015 6:58 pm
Were you activating programming mode as you plugged it in?
If not then it won't identify itself to the computer.